Ningbo youte electric Co.,LTD
Creating device saftey and easy control, and Contribute to device automation, and provide the safte and easy control systems for lifting industry. we focus on safety, efficiency and productivity. Our
Add to Cart
UC-AP USB terface 800kg-3200kg aerometal contruction rectangle elevator cabin mounting compression load cell
Description:
Rated load :800kg-3200kg rectangle under elevator cabin mounting compression load cell
SUMMIT Elevator Cabin load cell sensors UC-AP are supplied with their own integral rubber mounting arrangement, specifically designed for installation below the elevator & lift car. They easily mount under the cab and are extremely accurate, The UC-AP series load cell sensor are designed for use with new passenger lift up to 3200kg load (4pcs)
Note: Under cab sensors UC-AP series are not recommended for lift modernization or retrofit.
.
Features:
Cabin load cell UC-AP parameters:
| Model | UC-AP | UC-AP-B | UC-AP-C |
| Rated Load | 800kg | 800kg | 800kg |
| Rated Output | 2.0+-0.02%mv/v | 2.0+-0.02%mv/v | 2.0+-0.02%mv/v |
| Total error | +/-0.5% F.S | +/-0.5% F.S | +/-0.5% F.S |
| Repeatability | +/-0.5% F.S. | +/-0.5% F.S. | +/-0.5% F.S. |
| Creep 30min | +/-0.05% F.S/30min | +/-0.05% F.S/30min | +/-0.05% F.S/30min |
| Zero Balance | +/-1% F.S. | +/-1% F.S. | +/-1% F.S. |
| T C SPAN | +/-0.02% F.S./10 degree Celsius | +/-0.02% F.S./10 degree Celsius | +/-0.02% F.S./10 degree Celsius |
| Operation temperature range | -30 to 70 degree Celsius | -30 to 70 degree Celsius | -30 to 70 degree Celsius |
| Input Resistance | 1030+/-10 ohm | 1030+/-10 ohm | 1030+/-10 ohm |
| Output Resistance | 1000M+/-2 ohm | 1000M+/-2 ohm | 1000M+/-2 ohm |
| Safe Overload | 150% F.S. | 150% F.S. | 150% F.S. |
| Ultimate Overload | 200% F.S. | 200% F.S. | 200% F.S. |
| Construction | Aerometal | Aerometal | Aerometal |
| Protection Class | IP68 | IP68 | IP68 |
| Insulation impedance | ≥5000Ω | ≥5000Ω | ≥5000Ω |
| Cable length | 2.5m(black) | 2.5m(grey) | 5m(grey color) |
| Connection type | USB interface | Terminal Plug | Terminal plug |
Elevator cabin load cell UC-AP Size:
Installation and wiring diagram:
Installation postion: under the wire rope hitch plate
For traction elevator lifts, We SUMMIT provide a wide range of elevator load weighing device and strain load cells and it can suit different installation position requests, and usually there are 4 ways to mount it:
Broad selections, We offer you flexible, modular solutions for both requirements, and wide experience with modernization projects.
1.Under elevator cabin (cab load cells UC-AP, UC-H)
2.Clamped on the wire rope (wire rope load cells RH-SM,RH-A100)
3.Between the wire rope hitch plate such as RHP-E, RHP-F, RHP-G and so on. the customized load cells are available on requests(rope hitch compression load cells)
4.Mounted on the elevator car frame to detect the beam deformation (tension link load cell, cross head load cell RHP-X)
Your trustworthy partner-SUMMIT
With more than 20 years experience in the elevator and lifting industry and with our highly qualified and dedicated staffs, we can provide you the best possible sensor and weight measuring solutions in all types ofinstallations. SUMMIT ensures safety and quality at all steps of elevator and lifting. Long -standing expertise, all encompassing technology competencies, consulting and supported by qualified experts as a highly professional customer service--We trust SUMMIT is your trustworthy partner you can rely on.